机器效果

1.本机主要用于生产皮靴时将鞋帮面压弯及定型。
2.本机采用液压及气压驱动，利用热力及压力将鞋帮面压弯及定型，形成皮靴所需之弯曲形状。
3.按不同皮料的厚薄 及材质，调整压力的大小，加热的温度及压着定型的时间，从而获得最佳的定型效果。
4.左右侧压板及压板之加热温度可做独立调整，以适应不同的皮料特性。
5.外置式的压板行程调整，以便利调整所需的行程。
6.本机设有二次压力功能，使用一次压力减压下降，减少鞋面破裂，二次加压使靴面光泽度更佳。
-The machine is mainly used to bend and mould vamp in the production of boots.

-Adopting hydraulic and pneumatic driving,it utilizes heat and pressure to bend and mould vamp into curved shape required.

-The pressure,heating temperature and pressing time can be adjusted according to the thickness and type of leather,so as to obtain the optimal shaping result.

-The left and right side pressing plates and their heating temperature can be regulated individually to adapt to specific leather nature.

-The external pressing plate is convenient in regulation of-travel upon requirement.

-Side plates adjustable with double-pressing.The first reduced pressure is to avoid leather broken,the second is for a good effect shaping.